Infinity Paw Decal

Vinyl Decals come in 3 pieces:

1. Top layer is the transfer tape.  It holds your decal together until it is applied.

2. Middle layer is your actual decal. It is sandwiched between the transfer tape and the backing layer.

3. Bottom layer is the backing layer made from either wax paper or thicker plastic. It protects the adhesive until the decal is ready to be applied.

APPLICATION INSTRUCTIONS:

STEP 1: Clean

Wipe clean the window or surface you are applying the decal to with a mild cleaner or rubbing alcohol.  Allow to dry.

STEP 2: Peel

Carefully peel off the white backing layer or the thicker plastic layer from the decal. Only the vinyl and the clear thin transfer layer should remain.

STEP 3: Apply

Place your decal on the surface.  Use a credit card to rub and smooth the decal onto the window.

STEP 4: Remove

Now remove the clear transfer layer by peeling it off starting from the corner.  Only the vinyl decal should remain.

APPLICATION TIPS:

1. Do not apply on extreme cold or hot surfaces. Ideal temperature must be between 60°F & 90°F.

2. Do not touch the adhesive backing as oils from your skin will prevent sticking.

3. Before applying decal make sure there is no wax or oily products on the surface.

4. Do not wash for 48 hours.